The four Studio 440 disks that were included with every Studio 440 sold by SEQUENTIAL® are now available for $44. This includes one performance sound disk set of 32 acoustic & electronic percussion, one Studio disk set of 16 acoustic percussion sounds, one Studio disk set of 16 electronic percussion sounds, and 1 Sequencer Demo disk that works with the 32 sound disk set. Add an original first edition CM440C Studio 440 operations manual for $15 more.
LAST CALL for Studio 440 Foam Pads
1.0 inch square foam pads with PSA (pressure sensitive adhesive) are $5 each while supply lasts. Place a new pad on top of old pad OR trim 4 corners to fit inside.
Replace your LCD with a new bright blue OLED display for $95.
** Tested PC440-2 RevC board $444 ** Spare PC Boards for your Studio 440
The 9 empty sockets of the Studio 440 PC440-3 RevC and Rev1 boards pictured were populated with 8 CEM3389 ICs and a CEM5530 IC, then installed into a Studio 440 and operationally tested to confirm full functionality. After 24 hours of continued reliabilty testing the 9 ICs were removed from their sockets and these 2 tested unpopulated PC440-3 RevC and Rev1 boards are each currently available as a working back-up PC440-3 to assure long term reliability for your Studio 440. The tested unpopulated Rev1 Studio 440 PC440-3 board pictured below is also $444.
*** NOT Tested ***** Sold AS-IS *** *** PC440-3 RevC board $89 ***
For additional information email Sales@WineCountrySequential.com with your Studio 440 serial number and location.
